Kernel module sets large BARs for multiple GPUs
What happened
A developer put four AMD Radeon AI PRO R9700 cards and two RTX 3090s on a single x16 slot through a Broadcom PEX88096 PCIe switch on Linux, exploring Resizable BAR setups for multiple GPUs, Hacker News reported on its front page on November 12. The developer released a kernel module, gpu-rebar-layout, that sets each R9700's BAR to 32 GB before the GPU driver loads, then rescans. The report covers the module's release and the four R9700s; it does not say how the two RTX 3090s' BARs are set.
Written by AI from the coverage · updated 4 days ago
Coverage
Follow the reports to see the story from different sides.
- Hacker News front pageFitting Four 32 GB Resizable Bars Behind a PCIe Switch on Linux
一位开发者用 Broadcom PEX88096 PCIe 交换机在单 x16 插槽上接入四块 AMD Radeon AI PRO R9700 和两块 RTX 3090,并发布内核模块 gpu-rebar-layout,在 GPU 驱动加载前把每块 R9700 的 BAR 设为 32 GB 并重新扫描。
Heat over time
Heat now 3·Comparable peak 10(Nov 13 01:00)·Comparable change over 24 hours -50%
The trend only compares accounts observed without gaps, so its range may be smaller than the current heat. Hover or tap the chart for each hour; the left and right arrow keys step through it.